Synergizing Design Thinking and Lean Enablers for Adaptive Product Innovation in Servitized Manufacturing
DOI:
https://doi.org/10.61978/novatio.v3i2.1104Keywords:
Design Thinking, Lean Enablers, Adaptive Innovation, New Product Development, Servitization, Manufacturing StrategyAbstract
The increasing shift toward servitization in manufacturing necessitates adaptive innovation models that blend customer-centric and process-efficient methodologies. This study investigates how the strategic integration of Design Thinking (DT) and Lean Enablers influences adaptive New Product Development (NPD) capabilities in manufacturing firms undergoing servitization. A mixed-methods approach was employed, combining survey data from 100–150 manufacturing firms with qualitative interviews. Key variables DT practices, Lean Enabler adoption, and adaptive NPD performance were operationalized using validated instruments. Data analysis involved regression modeling and structural equation modeling to explore mediation effects. Findings reveal that the combined adoption of DT and Lean practices leads to significant improvements in NPD performance metrics, including reduced time-to-market, lower post-launch defect rates, higher customer satisfaction (NPS), and greater readiness for servitization. Lean Enablers such as Obeya, cadence-based design reviews, and knowledge reuse were found to mediate the relationship between DT and NPD adaptability, enhancing both learning and operational efficiency. Organizational culture, leadership commitment, and cross-functional collaboration were identified as critical enablers of successful DT–Lean integration. This research offers a robust empirical and conceptual framework for integrating DT and Lean in manufacturing contexts. It contributes to the literature by validating measurement instruments and demonstrating their predictive value for adaptive innovation performance. The findings are especially relevant for firms aiming to enhance strategic agility and sustain competitive advantage in rapidly evolving markets.
References
Asmaraningtyas, L. W., Rahmawati, I. D., & Fitriyah, H. (2024). Green Business Innovation: Sustainable Business Model Development Through Integration of Business Model Canvas, Design Thinking, and Islamic Business Ethics. Golden Ratio of Marketing and Applied Psychology of Business, 4(1), 57–74. https://doi.org/10.52970/grmapb.v4i1.337 DOI: https://doi.org/10.52970/grmapb.v4i1.337
Awan, Z. H., Islam, J., & Arshad, M. (2023). Determinants of Economic Sustainability: Exploring the Role of Knowledge Management With the Mediating Influence of Green Innovation in Pakistani Manufacturing SMEs. 2(4), 318–328. https://doi.org/10.61503/cissmp.v2i4.105 DOI: https://doi.org/10.61503/cissmp.v2i4.105
Ayala, N. F., Paslauski, C. A., Ghezzi, A., & Frank, A. G. (2017). Knowledge Sharing Dynamics in Service Suppliers’ Involvement for Servitization of Manufacturing Companies. International Journal of Production Economics, 193, 538–553. https://doi.org/10.1016/j.ijpe.2017.08.019 DOI: https://doi.org/10.1016/j.ijpe.2017.08.019
Bagherian, A., Srivas, A. L. L., & Mukherjee, S. (2024). Smart Factory Advancement in Industry 4.0: Exploring Barriers and Strategic Approaches Through Empirical Investigation. https://doi.org/10.21203/rs.3.rs-4114610/v1 DOI: https://doi.org/10.21203/rs.3.rs-4114610/v1
Bahta, D. T., Jiang, Y., Islam, R., & Ashfaq, M. (2020). Corporate Social Responsibility, Innovation Capability and Firm Performance: Evidence From SME. Social Responsibility Journal, 17(6), 840–860. https://doi.org/10.1108/srj-12-2019-0401 DOI: https://doi.org/10.1108/SRJ-12-2019-0401
Bezinelli, L. M., Eduardo, F. d. P., Palácio, D. d. C., Heller, D., Ramos, D. V. R., Denise de Fátima Barros Cavalcante, Vasques, M. T., César, P. F., Monte, J. C. M., Campos, A. H., & Corrêa, L. (2022). Special Care in Dental Curriculum: A Transversal Axis for Integrating Oral Health With Systemic Health. Special Care in Dentistry, 43(6), 776–784. https://doi.org/10.1111/scd.12754 DOI: https://doi.org/10.1111/scd.12754
Chaudhuri, A., Rogers, H., Søberg, P. V., & Pawar, K. S. (2019). The Role of Service Providers in 3D Printing Adoption. Industrial Management & Data Systems, 119(6), 1189–1205. https://doi.org/10.1108/imds-08-2018-0339 DOI: https://doi.org/10.1108/IMDS-08-2018-0339
Chen, K. H., Oliffe, J. L., & Kelly, M. (2018). Internet Gaming Disorder: An Emergent Health Issue for Men. American Journal of Men S Health, 12(4), 1151–1159. https://doi.org/10.1177/1557988318766950 DOI: https://doi.org/10.1177/1557988318766950
Chiu, W.-H., Dai, Z.-J., & Chi, H. (2023). Mastering Customer Lock-in by Servitization Innovation Strategies of Asset Specificity. Journal of Business and Industrial Marketing, 38(13), 239–263. https://doi.org/10.1108/jbim-02-2023-0121 DOI: https://doi.org/10.1108/JBIM-02-2023-0121
Claudy, M., Peterson, M., & Pagell, M. (2016). The Roles of Sustainability Orientation and Market Knowledge Competence in New Product Development Success. Journal of Product Innovation Management, 33(S1), 72–85. https://doi.org/10.1111/jpim.12343 DOI: https://doi.org/10.1111/jpim.12343
Cooper, R. G., & Sommer, A. F. (2016). The Agile–Stage‐Gate Hybrid Model: A Promising New Approach and a New Research Opportunity. Journal of Product Innovation Management, 33(5), 513–526. https://doi.org/10.1111/jpim.12314 DOI: https://doi.org/10.1111/jpim.12314
Coreynen, W., Matthyssens, P., & Bockhaven, W. V. (2017). Boosting Servitization Through Digitization: Pathways and Dynamic Resource Configurations for Manufacturers. Industrial Marketing Management, 60, 42–53. https://doi.org/10.1016/j.indmarman.2016.04.012 DOI: https://doi.org/10.1016/j.indmarman.2016.04.012
Dasinapa, M. B. (2024). The Integration of Sustainability and ESG Accounting Into Corporate Reporting Practices. Aaar, 2(1), 13–25. https://doi.org/10.60079/aaar.v2i1.167 DOI: https://doi.org/10.60079/aaar.v2i1.167
Detzen, N., Verbeeten, F. H. M., Gamm, N., & Möller, K. (2018). Formal Controls and Team Adaptability in New Product Development Projects. Management Decision, 56(7), 1541–1558. https://doi.org/10.1108/md-07-2017-0692 DOI: https://doi.org/10.1108/MD-07-2017-0692
Dubey, R., Bryde, D., Graham, G., Foropon, C., Kumari, S., & Gupta, O. K. (2021). The Role of Alliance Management, Big Data Analytics and Information Visibility on New-Product Development Capability. Annals of Operations Research, 333(2–3), 743–767. https://doi.org/10.1007/s10479-021-04390-9 DOI: https://doi.org/10.1007/s10479-021-04390-9
Dwivedi, P., Chaturvedi, V., & Vashist, J. K. (2021). Innovation for Organizational Sustainability: The Role of HR Practices and Theories. International Journal of Organizational Analysis, 31(3), 759–776. https://doi.org/10.1108/ijoa-07-2021-2859 DOI: https://doi.org/10.1108/IJOA-07-2021-2859
Eriksson, K., Olsson, A., & Carlsson, L. (2024). Beyond Lean Production Practices and Industry 4.0 Technologies Toward the Human-Centric Industry 5.0. Technological Sustainability, 3(3), 286–308. https://doi.org/10.1108/techs-11-2023-0049 DOI: https://doi.org/10.1108/TECHS-11-2023-0049
Fennell, K. L., Dam, P. v., Stephens, N., & Holloway, A. F. (2024). Leadership Education and Development: An Exploration of Australian Academic Educators’ Perceptions of Leadership Education for Health and Human Service Sector Leaders. Journal of Research on Leadership Education, 20(1), 80–102. https://doi.org/10.1177/19427751241245974 DOI: https://doi.org/10.1177/19427751241245974
Gao, B., & Yu, K. (2023). Knowledge Exchange in SMEs Service Innovation With Design Thinking. Management Decision, 61(7), 2029–2049. https://doi.org/10.1108/md-06-2022-0795 DOI: https://doi.org/10.1108/MD-06-2022-0795
Ghaffar, R. (2024). Editorial Note From Editor-in-Chief. Open Access Organization and Management Review, 3(1). https://doi.org/10.59644/oagmr.3(1).125 DOI: https://doi.org/10.59644/oagmr.3(1).125
Ginting, Y. M., Chandra, T., Miran, I., & Yusriadi, Y. (2023). Repurchase Intention of E-Commerce Customers in Indonesia: An Overview of the Effect of E-Service Quality, E-Word of Mouth, Customer Trust, and Customer Satisfaction Mediation. International Journal of Data and Network Science, 7(1), 329–340. https://doi.org/10.5267/j.ijdns.2022.10.001 DOI: https://doi.org/10.5267/j.ijdns.2022.10.001
Han, R., Brennecke, J., Borah, D., & Lam, H. K. (2024). The Use of Social Media in Different Phases of the New Product Development Process: A Systematic Literature Review. R and D Management, 55(1), 108–126. https://doi.org/10.1111/radm.12687 DOI: https://doi.org/10.1111/radm.12687
Hao, F., & Chon, K. (2021). Contactless Service in Hospitality: Bridging Customer Equity, Experience, Delight, Satisfaction, and Trust. International Journal of Contemporary Hospitality Management, 34(1), 113–134. https://doi.org/10.1108/ijchm-05-2021-0559 DOI: https://doi.org/10.1108/IJCHM-05-2021-0559
Hidayawanti, R., Amany, N. A., & Latief, Y. (2024). Integrating ISO 56002:2019 Organizational Context Evaluation With Lean Six Sigma for Cultivating an Innovation Culture in Precast Concrete Companies in Indonesia. E3s Web of Conferences, 517, 05026. https://doi.org/10.1051/e3sconf/202451705026 DOI: https://doi.org/10.1051/e3sconf/202451705026
Hoyos, P., Cabañas, M. V., García‐Oliva, C., Peña, J., & Hernáiz, M. J. (2024). Enhancing Enzymatic Rhamnolipid Synthesis: Comparative Analysis of Sustainable Energy Sources. Acs Sustainable Chemistry & Engineering, 12(33), 12421–12429. https://doi.org/10.1021/acssuschemeng.4c02982 DOI: https://doi.org/10.1021/acssuschemeng.4c02982
Iriogbe, H. O., Agu, E. E., Efunniyi, C. P., Osundare, O. S., & Adeniran, I. A. (2024). The Role of Project Management in Driving Innovation, Economic Growth, and Future Trends. International Journal of Management & Entrepreneurship Research, 6(8), 2819–2834. https://doi.org/10.51594/ijmer.v6i8.1468 DOI: https://doi.org/10.51594/ijmer.v6i8.1468
Jena, S. K. (2023). Impact of Customer-Centric Approach and Customer Dissatisfying Cost on Supply Chain Profit Under Price Competition. Journal of Business and Industrial Marketing, 38(11), 2341–2359. https://doi.org/10.1108/jbim-02-2022-0111 DOI: https://doi.org/10.1108/JBIM-02-2022-0111
Khalifeh, A., Al‐Adwan, A. S., Al‐Rousan, M., Yaseen, H., Mathani, B., & Wahsheh, F. R. (2023). Exploring the Nexus of Sustainability and Project Success: A Proposed Framework for the Software Sector. Sustainability, 15(22), 15957. https://doi.org/10.3390/su152215957 DOI: https://doi.org/10.3390/su152215957
Li, J. (2023). A Brief Comparison Between Tesla and NIO in the Electric Vehicle Industry. Highlights in Business Economics and Management, 23, 401–408. https://doi.org/10.54097/zd8pay39 DOI: https://doi.org/10.54097/zd8pay39
Nansubuga, B., & Kowalkowski, C. (2024). Moving to Subscriptions: Service Growth Through Business Model Innovation in Consumer and Business Markets. Journal of Service Management, 35(6), 185–215. https://doi.org/10.1108/josm-10-2023-0438 DOI: https://doi.org/10.1108/JOSM-10-2023-0438
Nazari, F., Anaraki, A. R., Taghavi, S. S., & Ghasemi, B. (2020). The Relationship Among Knowledge-Based Dynamic Process Capabilities, Innovation Processes and Innovation Performance: An Empirical Study of Knowledge-Based High-Tech Companies in Iran. Kybernetes, 50(5), 1379–1404. https://doi.org/10.1108/k-03-2020-0147 DOI: https://doi.org/10.1108/K-03-2020-0147
Presentación, R. V., Perfecto, H. R., Ruíz, R. O. L., & Valencia, W. A. (2023). Examining the Adoption of Lean Manufacturing in Lima Companies: An Exploratory Study of University Theses. International Journal of Professional Business Review, 8(7), e02930. https://doi.org/10.26668/businessreview/2023.v8i7.2930 DOI: https://doi.org/10.26668/businessreview/2023.v8i7.2930
Roberts, D., & Darler, W. (2017). Consumer Co-Creation: An Opportunity to Humanise the New Product Development Process. International Journal of Market Research, 59(1), 13–33. https://doi.org/10.2501/ijmr-2017-003 DOI: https://doi.org/10.2501/IJMR-2017-003
Rummel, F., Hüsig, S., & Steinhauser, S. (2021). Two Archetypes of Business Model Innovation Processes for Manufacturing Firms in the Context of Digital Transformation. R and D Management, 52(4), 685–703. https://doi.org/10.1111/radm.12514 DOI: https://doi.org/10.1111/radm.12514
Shah, S. H. H., Madni, S. H. H., Siti Zaitoon Bt. Mohd Hashim, Ali, J., & Faheem, M. (2024). Factors Influencing the Adoption of Industrial Internet of Things for the Manufacturing and Production Small and Medium Enterprises in Developing Countries. Iet Collaborative Intelligent Manufacturing, 6(1). https://doi.org/10.1049/cim2.12093 DOI: https://doi.org/10.1049/cim2.12093
Solem, B. A. A., Kohtamäki, M., Parida, V., & Brekke, T. (2021). Untangling Service Design Routines for Digital Servitization: Empirical Insights of Smart PSS in Maritime Industry. Journal of Manufacturing Technology Management, 33(4), 717–740. https://doi.org/10.1108/jmtm-10-2020-0429 DOI: https://doi.org/10.1108/JMTM-10-2020-0429
Vaittinen, E., & Martinsuo, M. (2019). Industrial Customers’ Organizational Readiness for New Advanced Services. Journal of Manufacturing Technology Management, 30(7), 1073–1096. https://doi.org/10.1108/jmtm-07-2018-0194 DOI: https://doi.org/10.1108/JMTM-07-2018-0194
Wechsler, J., & Schweitzer, J. (2019). Creating Customer-Centric Organizations: The Value of Design Artefacts. The Design Journal, 22(4), 505–527. https://doi.org/10.1080/14606925.2019.1614811 DOI: https://doi.org/10.1080/14606925.2019.1614811
Yu, E., & Sangiorgi, D. (2017). Service Design as an Approach to Implement the Value Cocreation Perspective in New Service Development. Journal of Service Research, 21(1), 40–58. https://doi.org/10.1177/1094670517709356 DOI: https://doi.org/10.1177/1094670517709356
